| Mic/Line Inputs |
Mic/Line Inputs: Balanced XLR, fully recallable
Input Sensitivity: -60 to +0 dBu
Switchable Pad: -20 dB
Analog Gain: 0 to +60 dB, 1 dB steps
Maximum Input Level: +30 dBu
Input Impedance: >5 kOhms
THD+N, Unity Gain (0 dB): 0.002% -92 dBu (20 Hz – 20 kHz, AES direct out, @ 0 dBu 1 kHz)
THD+N, Mid-Gain (+30 dB): 0.003% -91 dBu (20 Hz – 20 kHz, AES direct out, @ -30 dBu input 1 kHz)
Phantom Power +48V (+3V / -2V) |
| Stereo Line Inputs |
ST1, ST2 Connectors: Balanced, 1/4″ / 6.35 mm TRS
ST3 Connector: Unbalanced, stereo 1/8″ / 3.5 mm
Input Sensitivity (ST1, ST2 / ST3): Nominal +4 dBu ST1, ST2 / 0 dBu ST3
Trim: +/-24 dB
Maximum Input Level (ST1,ST2 / ST3): +22 dBu / +18 dBu
Input Impedance: >7 kOhms |
| Analog Outputs |
Outputs 1-14: Balanced, XLR
Outputs A and B: Balanced 1/4″ / 6.35 mm TRS
Source: Patchable
Output Impedance: <75 Ohms
Nominal Output: +4 dBu = 0 dB meter reading
Maximum Output Level: +22 dBu
Residual Output Noise: -90 dBu (muted, 20 Hz to 20 kHz) |
| AES Digital Audio Outputs |
AES Digital Output: Balanced XLR, 2 channel
96 kHz sampling rate (default with SRC bypassed)
Switchable Output Sample Rates: 44.1, 48, 88.2 (96 kHz)
2.5 Vpp balanced terminated 110 Ohms |
| Network Connections |
Connection Neutrik EtherCON (RJ45)
dsnake mode (48 kHz devices)*: 64 channels assignable, compatible with AR2412, AR84, AB168, ME
dx mode (96 kHz Devices): 32 channels assignable*, compatible with DX168
gigaACE (96 kHz Devices): 128 channels assignable, compatible with dLive, SQ and DXHub*
Inputs: Fully patchable
Outputs: Fully patchable
Sync/SRC: Assignable as master audio sync for all modes*SRC 64 channel |
| I/O Expansion Module |
Multi-channel IO option module
Inputs: Fully patchable
Outputs: Fully patchable
Sync/SRC assignable as master audio sync |
| Audio Specifications |
Measured balanced XLR in to XLR out, 0 dB gain, 0 dBu input |
| Dynamic Range |
112 dB |
| Frequency Response |
20 Hz to 20 kHz (+0/-0.5 dB) |
| Headroom |
+18 dB |
| Operating Level |
Internal Operating Level: 0 dBu |
| THD+N |
THD+N, Mic/Line Routed to Main L/R Out: Unity gain faders @ 0 dB, 0.006%, -84 dBu (20 Hz to 20 kHz) |
| dBFS Alignment |
+18 dBu = 0 dBFS (+22 dBu at XLR output) |
| Metering Accuracy |
Meter Calibration: 0 dB meter = -18 dBFS (+4 dBu at XLR out) |
| Metering |
Main Meter Type: 2 x 12 segment, fast (peak) response
Channel Meter Type: Single point metering, fully programmable color/brightness
Peak Indication: -3 dBFS (+19 dBu at XLR out), multi-point sensing |
| Sampling Rate |
96 kHz |
| Bit Depth |
Uses XCVI core custom bit widths in algorithms, up to 96-bit |
| Latency |
<0.7 ms, local mic input routed to main L/R. (direct, no EQ/ effects) |
| Faders |
3.9″ / 100.0 mm |
| Touch Screen |
7.0″ / 177.8 mm, capacitive, 800 x 480 resolution, 24-bit RGB |
| Softkeys |
16 |
| Groups |
Mute Groups: 8
DCA Groups: 8 |
| Network |
TCP/IP Ethernet for MIDI and control |
| MIDI |
TCP/IP and USB Type-B |
| Footswitch |
Single or dual, momentary or latching |
| Source |
Channels 1-48: Fully patchable
Global Source: SQ-Drive or USB Type-B streaming |
| Polarity |
Normal/inverted |
| Trim |
-24 to +24 dB |
| High Pass Filter |
12 dB/octave 20 Hz to 2 kHz |
| Insert |
Insert (Pre EQ/Comp): Fully patchable |
| Delay |
Up to 341 ms |
| Gate |
Gate: Patchable sidechain
Sidechain Filter: Hi-pass (20 to 5 kHz), Band-pass (120 Hz to 10 kHz), Lo-pass (120 Hz to 20 kHz)
Threshold / Depth: -72 dBu to +18 dBu / 0 to 60 dB
Attack / Hold / Release: 50 μs to 300 ms / 10 ms to 5 seconds / 10 ms to 1 second |
| Parametric Equalizer |
PEQ: 4-band fully parametric, 20 Hz to 20 kHz, ±15 dB
Band 1, Band 4: Selectable shelving (Baxandall), bell
Band 2, Band 3: Bell
Bell Width: Variable Q, 1.5 to 1/9th octave |
| Compressor |
Compressor: Patchable sidechain
Sidechain Filter: Hi-pass (20 to 5 kHz), Band-pass (120 Hz to 10 kHz), Lo-pass (120 Hz to 20 kHz), Q=1
Threshold / Ratio: -46 dBu to 18 dBu / 1:1 to infinity
Attack / Release: 30 μs to 300 ms / 50 ms to 2 seconds
Knee: Soft/hard
Detector Response: Peak/RMS switchable
Parallel Path Compression: Dry/wet -infin to 0 dB |
| Channel Direct Out |
Follow fader, mute, mute group, DCA (global all channels) |
| Source Selection |
Post-Preamp, Post-HPF, Post Gate, Insert Return, M Post PEQ, Post Comp, Post Delay
Trim: -∞ to 10 dB per channel |
| Insert |
Insert (Pre EQ/Comp): Fully patchable |
| Delay |
Up to 682 ms |
| Graphic Equalizer |
28 bands 31 Hz to 16 kHz, ±12 dB gain, constant 1/3 octave |
| FX |
Internal FX: 8 x RackFX engine, Send>Return or Inserted (4 dedicated fx bus)
Types: SMR Reverb, StereoTap Delay, Gated Reverb, ADT, BlueChorus, Symphonic Chorus, Flanger, Phaser
8 x Dedicated Stereo FX Returns: Fader, Pan, Mute, Routing to Mix/LR, 4-Band PEQ |
| PAFL |
PFL or stereo in-place AFL, 0 to -24 dB trim, PAFL
Delay up to 682 ms |
| Talkback |
Dedicated input, assignable to any mix, Gain, Pad, 48 V, 12 dB/oct HPF |
| Signal Generator |
Assignable to any mix, (sine/white/pink/bandpass noise) |
| RTA Real Time Analyzer |
31-bands, 1/3 octave 20 Hz to 20 kHz, follows PAFL source |
| Recorder |
SQ-Drive: USB Type-A
Stereo Record: 2-channel, WAV, 96 kHz, 24-bit, source fully patchable
Stereo Playback: 1/2-channel, WAV, 44.1, 48, 96 kHz, 16-/24-bit, source fully patchable
Multitrack Record: 16-channel, WAV, 96 kHz, 24-bit, track sources fully patchable
Multitrack Playback: 16-channel, WAV, 96 kHz, 24-bit fully patchable |
| USB Audio |
USB Audio Streaming: USB Type-B, Core Audio compliant, ASIO/WDM for Windows
Send (Upstream): 32-channel, 96 kHz, 24-bit
Return (Downstream): 32-channel, 96 kHz, 24-bit |
| Power |
100 to 240 VAC, 50 / 60 Hz
Maximum Power Consumption: |
| Operating Temperature |
32 to 104°F / 0 to 40°C |
| Dimensions (W × H × D) |
25.1 x 20.3 x 7.8″ / 638.0 x 514.9 x 198.0 mm |
| Weight |
29.3 lb / 13.3 kg |
