Loading...

CROWN T10 เครื่องขยายเสียง เพาเวอร์แอมป์

สินค้าของแท้ 100% นำเข้า ลดราคา

฿39,900.00

สินค้า CROWN T10 เครื่องขยายเสียง เพาเวอร์แอมป์ 2 Ch 1,350W @ 4Ω บริดจ์โหมดสเตอริโอโมโนคู่ขนาน ช่องทางการทำงาน สถานะการตัดและข้อผิดพลาด

เพิ่มเพื่อน

Loading...

CROWN T10 เครื่องขยายเสียง เพาเวอร์แอมป์ 2 Ch 1,350W @ 4Ω

พาวเวอร์แอมป์ขนาด 2U (2 Channels) กำลังขับ 1350W มีสวิทช์โหมดการทำงานให้เลือกได้ 3 แบบ ไม่ว่าจะเป็น Stereo, Parallel และ Bridge

T series เป็นเครื่องขยายเสียงระดับมืออาชีพที่ออกแบบโดย CROWN สำหรับสถานบันเทิง โรงภาพยนตร์ การแสดงบนมือถือ ห้องประชุม และสถานที่อื่นๆ ในมุมมองของพื้นที่ขนาดเล็กในสถานบันเทิงส่วนใหญ่และความสะดวกในการใช้งานมือถือ ซีรีส์ T ใช้การออกแบบโครงสร้างที่กะทัดรัด

ใช้เทคโนโลยีระดับมืออาชีพของแพลตฟอร์ม Crown วงจรขยายเสียงที่เรียบง่ายและมีประสิทธิภาพถูกนำมาใช้ และการออกแบบระบบระบายความร้อนที่ได้รับการอัพเกรดช่วยให้มั่นใจถึงประสิทธิภาพที่ดีของผลิตภัณฑ์ เป็นเวลากว่า 60 ปีที่ Crown ให้ความสำคัญกับการวิจัยและนวัตกรรมของผลิตภัณฑ์เพาเวอร์แอมป์มาโดยตลอด เครื่องขยายเสียงระดับมืออาชีพ T series จะทำให้คุณได้รับประสบการณ์ที่น่าพอใจ!

คุณสมบัติ 

  • บริดจ์โหมดสเตอริโอโมโนคู่ขนาน
  • ความไวอินพุตที่เลือกได้: 0.775V และ 1.4V
  • ขั้วต่ออินพุต RCA และ XLR; เอาต์พุต Speakon
  • ตัวควบคุมเกน 2 ตัว, สวิตช์เปิดปิด 1 ตัว, ไฟ LED แสดงสถานะ 1 ดวง, ไฟ LED 6 ดวง 2 กลุ่มตามลำดับ
  • ช่องทางการทำงาน สถานะการตัดและข้อผิดพลาด
  • แอมพลิฟายเออร์คลาส H
  • แรงดันไฟ 220V
Frequency response 20Hz-20kHz, + 0 / -1dB
Total harmonic distortion (THD) <0.5%, 20Hz-20kHz
Intermodulation distortion = / <0.35%
Conversion Rate > 10V / us
Voltage gain 36dB
Damping factor > 200 (8Ω, 10Hz-400Hz)
Signal to noise ratio (20 Hz-20 kHz below rated power, A-weighted sound level) > 100dB
Crosstalk -75dB @ 1kHz, -59dB @ 20kHz, based on rated output power
Input sensitivity 0.775V or 1.4V (rated output power 8Ω)
input resistance 20kΩ balanced, 10kΩ unbalanced
Input connector One balanced XLR connector or one unbalanced RCA connector per channel
Output connector One 4-pin Speakon ® and one pair of posts per channel
Front panel components Power switch, channel gain control knob
Rear panel components Output mode switch: stereo, parallel, bridge; input sensitivity switch: 0.775V or 1.4V
Power Indicator Blue LED
Signal Indicator One green LED per channel
Clip Indicator One yellow LED per channel
Fault Indicator One red LED for each channel, indicating that the channel is closed
Power cables Power plug: 10A, 250V; power cord: CCC 3×1.5mm 2
protection Protection circuit against short circuit, no load, switch noise, radio interference
Ventilation Backward air convection mechanism
Cooling Internal air exhaust cooling, fan cooling, fast adjustment, temperature protection
Dimensions (W × H × D) 19 ”x 3.46” x 14.5 ”(482 mm x 88 mm x 369 mm)
Net Weight 43.0 lb (19.5 kg)
Shipping weight 47.4 lb (21.5 kg)
  • ขอสงวนสิทธิ์ในการเปลี่ยนแปลงข้อมูลสินค้า และราคาโดยไม่ต้องแจ้งให้ทราบล่วงหน้า